RE-E-POWER.com
RE-E-POWER.com
RE-E-POWER.com
E-Pod
Control
Components
Control
Components
E-Pod
Control
Components
Control
Components
The RE-E-POWER component control box is the heart
of the system. It houses the motor controller, in-line
fuse, and the optional "set it and forget it" charge
controller circuit. Battery and motor cables connect to
the leads coming from the control box. 12"x12"x8"
of the system. It houses the motor controller, in-line
fuse, and the optional "set it and forget it" charge
controller circuit. Battery and motor cables connect to
the leads coming from the control box. 12"x12"x8"
The RE-E-POWER component control box is the heart
of the system. It houses the motor controller, in-line
fuse, and the optional "set it and forget it" charge
controller circuit. Battery and motor cables connect to
the leads coming from the control box. 12"x12"x8"
of the system. It houses the motor controller, in-line
fuse, and the optional "set it and forget it" charge
controller circuit. Battery and motor cables connect to
the leads coming from the control box. 12"x12"x8"
The E-Pod Helm Control consists of a Stainless Steel
mounting plate which houses the marine grade ON/OFF
three-way power switch and throttle control lever . A
single 2" hole will allow all wires and controls to recess
into the location of your choice. Wire length comes
standard @ 7 feet. 4"x3.5"x1/8"
mounting plate which houses the marine grade ON/OFF
three-way power switch and throttle control lever . A
single 2" hole will allow all wires and controls to recess
into the location of your choice. Wire length comes
standard @ 7 feet. 4"x3.5"x1/8"
The Ammeter is one of the most important parts of an
electric propulsion system. Amp draw readings allow
you to tailor your motoring to your desired range with
the available battery capacity and also will identify
problems instantly, i.e. Prop obstruction. Fits a 2.75"
diameter hole with a 3.5" diameter face. Reads 0-200
amps. External Shunt. 7 feet of wire provided standard.
electric propulsion system. Amp draw readings allow
you to tailor your motoring to your desired range with
the available battery capacity and also will identify
problems instantly, i.e. Prop obstruction. Fits a 2.75"
diameter hole with a 3.5" diameter face. Reads 0-200
amps. External Shunt. 7 feet of wire provided standard.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
The E-Pod Helm Control consists of a Stainless Steel
mounting plate which houses the marine grade ON/OFF
three-way power switch and throttle control lever . A
single 2" hole will allow all wires and controls to recess
into the location of your choice. Wire length comes
standard @ 7 feet. 4"x3.5"x1/8"
mounting plate which houses the marine grade ON/OFF
three-way power switch and throttle control lever . A
single 2" hole will allow all wires and controls to recess
into the location of your choice. Wire length comes
standard @ 7 feet. 4"x3.5"x1/8"
The Ammeter is one of the most important parts of an
electric propulsion system. Amp draw readings allow
you to tailor your motoring to your desired range with
the available battery capacity and also will identify
problems instantly, i.e. Prop obstruction. Fits a 2.75"
diameter hole with a 3.5" diameter face. Reads 0-200
amps. External Shunt. 7 feet of wire provided standard.
electric propulsion system. Amp draw readings allow
you to tailor your motoring to your desired range with
the available battery capacity and also will identify
problems instantly, i.e. Prop obstruction. Fits a 2.75"
diameter hole with a 3.5" diameter face. Reads 0-200
amps. External Shunt. 7 feet of wire provided standard.
The E-Pod Dual Helm Control consists of a Stainless
Steel mounting plate with a moulded plastic housing
which contains the marine grade ON/OFF three-way
power switches and throttle control levers . Base
measures 4"w x 10"L x 4"h.
Steel mounting plate with a moulded plastic housing
which contains the marine grade ON/OFF three-way
power switches and throttle control levers . Base
measures 4"w x 10"L x 4"h.
The E-Pod Dual Helm Control consists of a Stainless
Steel mounting plate with a moulded plastic housing
which contains the marine grade ON/OFF three-way
power switches and throttle control levers . Base
measures 4"w x 10"L x 4"h.
Steel mounting plate with a moulded plastic housing
which contains the marine grade ON/OFF three-way
power switches and throttle control levers . Base
measures 4"w x 10"L x 4"h.
| Visit the Official RE-E-POWER Forum |
| Visit the Official RE-E-POWER Forum |